Worktops made in 25 mm thick MDF boards with a ± 950 kg/m3 density. Boards covered in low-pressure laminate, with a grammage of ± 120 g/m2.

Hexagonal metal legs made of cold rolled steel. Legs painted with epoxy in RAL 9003, polar white. Perimetral metal frame. Stainless levelers with 1,5 cm adjustment.

Optional electrification device, with three sockets, two voice-data plugs and a general Switch. Electrification device with an aluminium cover.

Table leg made of steel tubes joint with a zamak bracket in each corner.

Straight edges in 2 mm thick ABS. Metal threads for desk connections. Rounded corners based on a 2 mm radius.